Locate your stuff! The Asset Tracker Kit from Particle contains all of the pieces you need to build a GSM + GPS location tracker for your most prized possessions. In addition to a GPS Shield, the Asset Tracker Kit comes with a weatherproof enclosure, so it’ll keep your electronics safe from the dust, dirt, and moisture of the great outdoors. Keep your bicycle, baby, and backpack safe--satellite lock onto this bargain project kit today!

The Asset Tracker Kit comes with a Particle SIM card with service in more than 100 countries worldwide, and includes 3 months of Particle's 1MB monthly data plan for IoT devices. All Electrons also include Particle's development tools, access to a cloud platform with messaging, and a SIM dashboard for managing and updating your new connected hardware.

The Electron is a GSM-only device, and does not support CDMA networks. Some US carriers are planning to sunset their 2G networks beginning in 2017, so the Electron 3G (Americas) is recommended for customers in the US.

This is the 2G Global version. Particle also offers two types of Electron 3G Kits—the aforementioned one for North and South America (850/1900 MHz) and one for Europe/Asia/Africa (900/1800 MHz). Check the full list of compatible countries for the location in which your product will be deployed.

Contents:

Electron

USB Micro B Cable

Particle SIM Card

Cellular Antenna

2000mAh LiPo Battery

Particle Sticker

Resistor 220-Ohm

Breadboard

Photoresistor

Bright LED - White

Basic Data Charges*:

Particle's 1MB monthly data plan: - 3 months included with kit- $2.99/month for 1MB (thousands of messages) - No contracts, cancel anytime

$0.99/each additional MB

3G Global and 3G Americas/Aus versions also available.

*Data rates vary by country and by data usage, see here for full pricing and bulk discounts.

** Continent compatibility is simplified and exceptions exist. Please be sure to check the full list of compatible countries for the location in which your product will be deployed.

The new and improved Programmer Shield is essentially a USB-JTAG converter that gives advanced users complete access to the Photon's memory space. It supports openOCD and the WICED SDK, and is built around the FT2232H high speed USB FIFO.

Unlike the previous Programmer Shield, it is fully standalone and requires no third-party programmers.

In addition to providing a JTAG interface, this shield can also act as a USB to Serial converter. You can also use this shield as a generic JTAG programmer for your other projects!

Designed for use with the Photon, backwards compatible with the Core.

The Particle Power Shield is the best way to—you guessed it—provide power to your mobile Particle projects. Based around the MCP73871 battery management controller, this shield allows you to simultaneously power a Photon and charge a connected Li-Ion or Li-Po battery. You'll also be able to monitor battery levels using the Photon itself, which makes the Power Shield the best way to untether your wireless project.

Besides the on-board USB port, you can also use an external DC power supply or solar-cell to charge the battery.

This shield ships with a 3.7V, 2000mAh Li-Po battery and headers. Plug & Play - No soldering required!

Designed for use with the Photon, backwards compatible with the Core.

The Photon is a $19 tiny Wi-Fi development kit for creating connected projects and products for the Internet of Things. It's easy to use, it's powerful, and it's connected to the cloud.

The tools that make up the Photon's ecosystem (and come along with the board) are designed to let you build and create whether you're an embedded engineer, web developer, Arduino enthusiast or IoT entrepreneur. You'll be able to write your firmware in our web or local IDE, deploy it over the air, and build your web and mobile apps with ParticleJS and our Mobile SDK.

The board itself uses a Broadcom WICED Wi-Fi chip (one that can be found in Nest Protect, LIFX, and Amazon Dash) alongside a powerful STM32 ARM Cortex M3 microcontroller. It's like the Spark Core, but better! The WICED chipset is much faster than the original CC3000 in the 'Core and also supports SSL and Soft-AP mode.

This is the Photon with breadboard headers connected. We also have the Photon without headers.

If you're looking for a version with a breadboard and USB cable, click here for the Photon Starter Kit.

Add some dazzle to your Spark Core or Photon with this custom-made NeoPixel ring kit! 24 ultra bright smart LED NeoPixels are arranged in a circle with 2.6" (66mm) outer diameter. Snap in your Spark and upload the NeoPixel library code to light up the LEDs, make an Internet of Blinky! Each LED is addressable as the driver chip is inside the LED. Each one has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim. Power the whole thing with about 3.5-5.5 VDC battery pack and you're ready to rock.

To make your project portable, we have a JST connector for attaching an external battery. Power with 3.5 - 5.5V DC, a rechargeable LiPoly or LiIon cell battery works great, or 3xAAA or 3xAA battery pack. The JST included is so you can make your own battery connection. Use pin D6 for the NeoPixel library code, all other pins are availale to use and have two breakouts on either side so you can wire up other sensors or devices.

Comes as a single round PCB with 24 individually addressable RGB LEDs assembled and tested, two 12 pin 0.1" socket headers and a bonus JST cable. Some light soldering is required, you can solder the two sockets in place to allow unplugging of the Spark, or just solder it directly in place for a slimmer look.

Please Note: Particle (Spark) Core/Photon and Battery not included (but we do have them in the shop!)