Squeeze once to turn on, squeeze again to turn off! This clicky switch makes a great power switch or mode toggler. We like this switch because it's easy to embed in a seam for easily powering up/off wearable and fabric projects. Can handle up to 14V and 2 Amps! This is a really satisfying switch.

As of May 20th, the dimensions of this switch are:

Length of wires: 190mm / 7.5"

Dimensions of body: 16mm x 15mm x 6mm / 0.6" x 0.6" x 0.2"

Weight: 4.4g

Make your own little LED strip arrangement with this stick of NeoPixel LEDs. We crammed 8 of the tiny 5050 (5mm x 5mm) smart RGB LEDs onto a PCB with mounting holes and a chainable design. Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as the driver chip is inside the LED. Each one has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim. Power the whole thing with 5VDC (4-7V works) and you're ready to rock.The LEDs are 'chainable' by connecting the output of one stick into the input of another - see the photo above. There is a single data line with a very timing-specific protocol. Since the protocol is very sensitive to timing, it requires a real-time microconroller such as an AVR, Arduino, PIC, mbed, etc. It cannot be used with a Linux-based microcomputer or interpreted microcontroller such as the netduino or Basic Stamp. Our wonderfully-written Neopixel library for Arduino supports these pixels! As it requires hand-tuned assembly it is only for AVR cores but others may have ported this chip driver code so please google around. An 8MHz or faster processor is required.Comes as a single stick with 8 individually addressable RGB LEDs assembled and tested.Our detailed NeoPixel Uberguide has everything you need to use NeoPixels in any shape and size. Including ready-to-go library & example code for the Arduino UNO/Duemilanove/Diecimila, Flora/Micro/Leonardo, Trinket/Gemma, Arduino Due & Arduino Mega/ADK (all versions)

NeoPixel Stick - 8 x 5050 RGB LED with Integrated Drivers (6:15)

This knit conductive fabric is plated with real Silver and super luxe! Use small pieces on the tips of gloves or in any soft circuit situation where you need a bit of stretch. This highly conductive fabric has a resistance of less than 1 ohm per foot in any direction across the textile. It can be used to make soft keypads and capacitive touch sensors, as well as soft "squeeze" switches. Great for use with FLORA.Sold as a 20cm x 20cm piece (minimum dimension)Use a dry iron on medium. Dry cleaning recommended. Do not use steam! Discoloration can occur.

Knit Conductive Fabric - Silver 20cm square (11:35)