Give your Ultimate GPS V3 a boost with this external active antenna. This GPS antenna draws about 10mA and will give you an additional 28 dB of gain. It's got a 5 meter long cable so it will easily reach wherever you need it to. The antenna is magnetic so it will stick to the top of a car or truck (or any other steel structure)Comes with a standard SMA connector on the end. If you want to connect to our Ultimate GPS V3 module, be sure to pick up a uFL to SMA adapter!GPS not included.

Designed to deliver the best audio performance from the Raspberry Pi A+/B+/RPi2/3, fit within the Pi’s form factor and provide additional access to several of the Pi’s 40way I/O signals allowing easy addition of IR sensors, Rotary Encoder or i2c devices (such as OLED screens) etc.

The Pi-DigiAMP+ takes everything we’ve learned from the previous Pi-AMP+ and Pi-DAC+ combination, shrinks it down and reduced the overall system cost by around £25!

We have used the latest Texas Instruments chipset (TAS5756m) to deliver awesome performance from a single HAT board. As with our other products you can be assured that the Linux driver support is already built-in to Raspbian Linux (using the same device drivers as the Pi-DAC+) and supported by the many software audio packages already on the market. RuneAudio / Volumio / Moode / PiCorePlayer / PiMusicBox / OpenELEC and others. The IQaudIO Pi-DigiAMP+ easily supports 24-bit / 192kHz file formats but is equally at home with lower quality MP3s bringing your music alive sonically.

Please note that The Pi-DigiAMP+ uses GPIO22 as amp-mute and when powered on is in mute state, examples are in the user docs and many software releases already support the Pi-AMP+ in the same way.

The IQaudIO Pi-DigiAMP+ connects easily to the Raspberry Pi and provides up to 2 x 35W stereo output to speakers.

The IQaudIO Pi-DigiAMP+ Features:

HAT compliant accessory; EEPROM, mounting holes

Full-HD audio – up to 24-bit/192kHz playback

Up to 2x35w of crystal clear amplification

No soldering required to your Raspberry Pi

Integrated hardware volume control (via ALSA)

Powers the Raspberry Pi from the Pi-DigiAMP+ power input

Linux driver support already delivered within Raspbian

AMP can be enabled / disabled via Raspberry Pi’s GPIO22

Advanced ESD protection

Uses the digital I2S audio signals to reduce CPU load over USB audio solutions

Fully built and tested Raspberry Pi accessory

Designed and manufactured in the UK